Привет, я не могу обновить или откатить прошивку моего AP U6+. Сейчас у меня версия 6.6.78. Я пытался обновить через GUI и SSH, но всегда заканчивается ошибкой "Firmware Upgrade Failed". Спасибо за помощь.

Логи:

Downloading firmware from 'https://dl.ui.com/unifi/firmware/UAPL6/6.6.65.15248/BZ.MT7981_6.6.65+15248.240130.1638.bin'
syswrapper[8629]: Upgrade Firmware Downloading:
syswrapper[8629]: Download ... OK
syswrapper[8629]: Upgrade Firmware Check:
syswrapper[8629]: open(/dev/mmcblk0) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p1) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p2) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p3) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p4) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p5) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p6) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p7) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p8) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p9) failed: No such file or directory
syswrapper[8629]: open(/dev/mmcblk0p10) failed: No such file or directory
syswrapper[8629]: FW Image partition "bl2"(2) ends at address, 0x00490000 outside the flash memory map.  Valid range is 0x00000000-0x00400000.
Couldn't open image file: /tmp/fwupdate.bin!
Invalid firmware. Exit status for firmware check = 65024.